ErgoVerse.com Online Product Catalog - Sit-Stand/Lean ERV - Sit-Stand/Lean ERV - Product Availability, Pricing and Information

ANDROMEDA Electric Workstation Base 2-Leg

The ANDROMEDA Electric Workstation Base (2-Leg) is a TRUE sit-stand frame. With an adjustment range from 23.5" to 49.5" it more than meets the needs of anyone from fully seated to standing and anywhere in between. A 6-button controller offers 4 "touch-and-go" programmable memory presets to encourage regular posture changes. The exceptionally quiet "soft-start" movement eliminates coffee-slosh and the anti-collision protection stops and reverses the desk should it make contact with a fixed obstruction. With a combined lifting capacity of 220 lbs and width adjustment from 43" to 68.5" the ANDROMEDA is able to handle the largest of tops as well as most common computer hardware, even large multi-monitor deployments.

ANDROMEDA Workstation Bases are easily deployed to support existing or custom desk tops or can be paired with a high quality ErgoVerse DIADEM Waterfall Table Top.

Product Features

26" of Height Adjustment
ANDROMEDA Workstation Bases can adjust from 23.5" to 49.5" in height, a wide enough range to accommodate every working position for the majority of users
Dual Synchronized Motors
Linear Actuator motors are housed in each leg and electronically synchronized for smooth movement
Programmable
A 6-button controller offers 4 Touch-and-Go memory presets as well as direct up/down control for additional adjustment throughout the day
Adjustable Width
The ANDROMEDA is adjustable in width from 43" to 68.5", allowing it to accommodate tabletops from 44" to 84" in width
Anti-Collision Safety Feature
ANDROMEDA frames will stop and back away should they meet come in contact with a fixed obstacle
Overload and Overheating Protection
ANDROMEDA height adjustable workstation bases feature safety overrides to ensure that the motors are protected from being operated outside of recommended weight and time on/off ratings.
Soft-Start Feature
The ANDROMEDA Workstation Bases won't spill your drink with abrupt starts and stops thanks to the graduated acceleration and deceleration technology.
Environmentally Friendly
ANDROMEDA frames consume virtually zero energy while in standby mode and only 200 watts during any height adjustment. They also ship in fully recyclable packaging materials.

Technical Specifications

Height Adjustment Range
23.5" - 49.5" (59.7 - 125.7 cm) - without top
Rate of Height Adjustment
1.5" (38 mm) / second
Width (Adjustable)
43" - 73.6" (109.2 cm - 186.7 cm)
Depth (Feet)
23.75" (60.3 cm)
Depth (Top Mounting Brackets)
19.75" (50.2 cm)
Width (Feet)
2.75" (7 cm)
Maximum Load
220 lbs (100 kg)
Programmability
Four position memory/six-button programmable controller with LED display
Sound Level Rating
50 dB
Electrical Requirements
- Input Voltage 100-240V AC
- Output Voltage 24V DC
Standby Power Consumption
0.1 W
Operating Power Consumption
200 W
Duty Cycle
2 minutes ON, 18 minutes OFF (internal overheat and overload protection)
Note: 1 complete cycle (UP and Down the full 26" range) takes only 35 seconds.
Top Crossbeam Removable?
No
Anti-Collision Protection
Yes (stops and reverses direction)
Warranty
2 Years (Motors and Electrical), 4 Years (Frame)
Package Contents
ErgoVerse 2-Leg Height Adjustable Base, Assembly Hardware, Assembly Instructions.
Estimated Assembly Time
30 minutes (1 person). Mounting a top to the frame should take no more than 5 - 10 minutes - a second person is recommended.
Tools Required
Allen Wrenches (included). Installation of top and control panel will require a Phillips screwdriver.

Model List for ANDROMEDA Electric Workstation Base 2-Leg

AWB-2S - ErgoVerse ANDROMEDA Electric Workstation Base 2-Leg, Height Adjustable from 23.5" to 49.5" at 1.5" per second, 220 lb lift capacity, Width Adjustable from 40" - 71", 23.75" Feet, Silver
AWB-2B - ErgoVerse ANDROMEDA Electric Workstation Base 2-Leg, Height Adjustable from 23.5" to 49.5" at 1.5" per second, 220 lb lift capacity, Width Adjustable from 40" - 71", 23.75" Feet, Black